Laser-Guided, Self-Confined Graphitization for High-Conductivity Embedded Electronics.

Facile fabrication of highly conductive and self-encapsulated graphene electronics is in urgent demand for carbon-based integrated circuits, field effect transistors, optoelectronic devices, and flexible sensors. The current fabrication of these electronic devices is mainly based on layer-by-layer techniques (separate circuit preparation and encapsulation procedures), which show multistep fabrication procedures, complicated renovation/repair procedures, and poor electrical property due to graphene oxidation and exfoliation. Here, we propose a laser-guided interfacial writing (LaserIW) technique based on self-confined, nickel-catalyzed graphitization to directly fabricate highly conductive, embedded graphene electronics inside multilayer structures. The doped nickel is used to induce chain carbonization, which firstly enhances the photothermal effect to increase the confined temperature for initial carbonization, and the generated carbon further increases the light-absorption capacity to fabricate high-quality graphene. Meanwhile, the nickel atoms contribute to the accelerated connection of carbon atoms. This interfacial carbonization inherently avoids the exfoliation and oxidation of the as-formed graphene, resulting in an 8-fold improvement in electrical conductivity (~20,000 S/m at 7,958 W/cm2 and 2 mm/s for 20% nickel content). The LaserIW technique shows excellent stability and reproducibility, with ±2.5% variations in the same batch and ±2% variations in different batches. Component-level wireless light sensors and flexible strain sensors exhibit excellent sensitivity (665 kHz/(W/cm2) for passive wireless light sensors) and self-encapsulation (<1% variations in terms of waterproof, antifriction, and antithermal shock). Additionally, the LaserIW technique allows for one-step renovation of in-service electronics and nondestructive repair of damaged circuits without the need to disassemble encapsulation layers. This technique reverses the layer-by-layer processing mode and provides a powerful manufacturing tool for the fabrication, modification, and repair of multilayer, multifunctional embedded electronics, especially demonstrating the immense potential for in-space manufacturing.

3D Printed Room Temperature Phosphorescence Materials Enabled by Edible Natural Konjac Glucomannan.

Shaping room temperature phosphorescence (RTP) materials into three-dimensional (3D) bodies is important for stereoscopic optoelectronic displays, but remains challenging due to their poor processability and mechanical properties. Here, konjac glucomannan is employed to anchor arylboronic acids with various π conjugations via a facile B─O covalent reaction to afford printable inks, using which full-color high-fidelity 3D RTP objects with high mechanical strength can be obtained via direct ink writing-based 3D printing and freeze-drying. The doubly rigid structure supplied by the synergy of hydrogen bonding and B─O covalent bonding can protect the triplet excitons, thus the prepared 3D RTP object shows a striking lifetime of 2.14 s. The printed counterparts are successfully used for 3D anti-counterfeiting and can be recycled and reprinted nondestructively by dissolving in water. This success expands the scope of printable 3D luminescent materials, providing an eco-friendly platform for the additive manufacturing of sophisticated 3D RTP architectures. This article is protected by copyright. All rights reserved.

Ferroelectricity-Defects Synergistic Artificial Synapses for High Recognition Accuracy Neuromorphic Computing.

The ability of ferroelectric memristors to modulate conductance and offer multilevel storage has garnered significant attention in the realm of artificial synapses. On one hand, the resistance change of ferroelectric memristors mainly depends on the polarization reversal. On the other hand, the defects such as oxygen vacancies, which are inevitable presence during high-temperature processes, can undergo diffusion drift with the polarization reversal, thereby change the interface potential barrier. Thus, it is both desirable and necessary to investigate the synergistic effect of ferroelectricity and defects. Here, we prepare BaTiO3 ferroelectric memristor by pulse laser deposition and achieve resistance switching through the synergistic effect of ferroelectricity and oxygen vacancies. The memristor shows excellent switching characteristics with a large switching ratio (104) and good stability (103 s). It effectively emulates the features of artificial synapses and accomplishes decimal logical neural computing. In the neuromorphic system crafted with the memristor, the recognition accuracy of the 28 × 28 pixel image reaches 94.9%. These findings strongly support the research of ferroelectric memristors in neuromorphic devices.

Migrate demographic group for fair Graph Neural Networks.

Graph Neural networks (GNNs) have been applied in many scenarios due to the superior performance of graph learning. However, fairness is always ignored when designing GNNs. As a consequence, biased information in training data can easily affect vanilla GNNs, causing biased results toward particular demographic groups (divided by sensitive attributes, such as race and age). There have been efforts to address the fairness issue. However, existing fair techniques generally divide the demographic groups by raw sensitive attributes and assume that are fixed. The biased information correlated with raw sensitive attributes will run through the training process regardless of the implemented fair techniques. It is urgent to resolve this problem for training fair GNNs. To tackle this problem, we propose a brand new framework, FairMigration, which is able to migrate the demographic groups dynamically, instead of keeping that fixed with raw sensitive attributes. FairMigration is composed of two training stages. In the first stage, the GNNs are initially optimized by personalized self-supervised learning, and the demographic groups are adjusted dynamically. In the second stage, the new demographic groups are frozen and supervised learning is carried out under the constraints of new demographic groups and adversarial training. Extensive experiments reveal that FairMigration achieves a high trade-off between model performance and fairness.

Argon non-thermal plasma treatment promotes the development of rice (Oryza sativa L.) in saline alkali environments.

Soil salinization leads to a reduction in arable land area, which seriously endangers food security. Developing saline-alkali land has become a key measure to address the contradiction between population growth and limited arable land. Rice is the most important global food crop, feeding half of the world's population and making it a suitable choice for planting on saline-alkali lands. The traditional salt-alkali improvement method has several drawbacks. Currently, non-thermal plasma (NTP) technology is being increasingly applied in agriculture. However, there are few reports on the cultivation of salt/alkali-tolerant rice. Under alkaline stress, argon NTP treatment significantly increased the germination rate of Longdao 5 (LD5) rice seeds. In addition, at 15 kV and 120 s, NTP treatment significantly increased the activity of antioxidant enzymes such as catalase and SOD. NTP treatment induced changes in genes related to salt-alkali stress in rice seedlings, such as chitinase and xylanase inhibitor proteins, which increased the tolerance of the seeds to salt-alkali stress. This experiment has expanded the application scope of NTP in agriculture, providing a more cost-effective, less harmful, and faster method for developing salt-alkali-tolerant rice and laying a theoretical foundation for cultivating NTP-enhanced salt-alkali-tolerant rice.

Enhancing fuel characteristics and combustion performance of cellulose-rich straws through CO2-assisted torrefaction.

Cellulose-rich straws of corn and rice were torrefied under carbon dioxide, and the fuel characteristics and combustion performance of the obtained biochar were investigated. A high severity resulted in surface collapse, greater pore volume, elimination of oxygen, elevated calorific value, and improved hydrophobicity in biochar. Following carbon dioxide torrefaction, the cellulose content in solid biochar experienced a slight decrease when the temperature was raised to 220 °C for longer residence durations. At 300 °C, the cellulose content in the biochar was nearly eliminated, while the relative proportion of non-sugar organic matter in corn stover and rice straw increased to 87.40 % and 77.27 %, respectively. The maximum calorific values for biochar from corn and rice straws were 22.38 ± 0.03 MJ/kg and 18.72 ± 0.05 MJ/kg. The comprehensive combustion indexes of rice and corn straw samples decreased to 1.06 × 10-7 and 1.31 × 10-7 after torrefaction at 300 °C, respectively. In addition, the initial decomposition temperatures increased by 38 °C and 45 °C, while the ultimate combustion temperatures rose by 13 °C and 16 °C for corn and rice straws, respectively. These results imply an extended combustion timeframe for the torrefied samples.

Selectively fractionate hemicelluloses with high molecular weight from poplar thermomechanical pulp by tetramethylammonium hydroxide.

Selective fractionation of hemicelluloses is of great significance for realizing high-value application of hemicelluloses and comprehensive utilization of lignocellulosic biomass. Tetramethylammonium hydroxide (TMAH) solvent has been confirmed as a promising solvent to selectively fractionate hemicelluloses from holocellulose. Herein, TMAH solvent was adopted to pretreat poplar thermomechanical pulp (PTMP) for the selective fractionation of hemicelluloses and enhancement of enzymatic hydrolysis performance of residues. The maximal hemicelluloses yield (65.0 %) and excellent cellulose retention rate (93.3 %) were achieved after pretreatment by the 25 wt% TMAH solvent, while the delignification was only 33.9 %. The hemicelluloses fractions could be selectively fractionated with high molecular weights (109,800-118,500 g/mol), the contents of Klason lignin in them were low (3.2-5.9 %), and the dominating structure of them was 4-O-methylglucurono-ß-D-xylan. Compared to the H2SO4 and NaOH methods, the hemicelluloses fractionated by TMAH method exhibited higher yields, more complete structures and higher molecular weights. Furthermore, the crystalline structure of cellulose practically remained stable, and the highest yield of enzymatic hydrolysis glucose was 57.5 %, which was 3.3 times of that of PTMP. The fractionation effectiveness of TMAH solvent was not significantly reduced after repeatedly recycling. This work demonstrated TMAH solvent could selectively fractionate hemicelluloses from PTMP and efficiently promote sustainable poplar-based biorefinery.

Identification and prognostic biomarkers among ZDHHC4/12/18/24, and APT2 in lung adenocarcinoma.

S-palmitoylases and S-depalmitoylases are differentially expressed in various cancers and several malignant tumors and show a strong prognostic ability. Notwithstanding, the potential clinical impact of S-palmitoylases and S-depalmitoylases, particularly in the prognosis and progression of lung adenocarcinoma (LUAD), has not been clarified. Expression levels of S-palmitoylases and S-depalmitoylases in LUAD were investigated using TCGA. GEPIA was used to evaluate the mRNA levels of S-palmitoylases and S-depalmitoylases at different pathological stages. Metascape was used to investigate the biological significance of S-palmitoylases and S-depalmitoylases. The Kaplan-Meier plotter was used to analyze the prognostic value of S-palmitoylases and S-depalmitoylases. CBioportal was used to analyze gene alterations in S-palmitoylases and S-depalmitoylases. UALCAN was used to examine DNA promoter methylation levels of S-palmitoylases and S-depalmitoylases. Finally, we investigated the relationship between S-palmitoylases, S-depalmitoylases, and tumor-infiltrating immune cells using TIMER. Correlations with immune checkpoint-related genes were determined using the R packages reshape2, ggpubr, ggplot2, and corrplot. PCR was also performed to assess the degree of ZDHHC4/12/18/24 and APT2 transcript expression in lung adenocarcinoma and adjacent normal lung tissues. HPA was utilized to investigate protein levels of S-palmitoylases and S-depalmitoylases in LUAD and normal lung tissue. Our study found that ZDHHC2/3/4/5/6/7/9/12/13/16/18/20/21/23/24, APT1/2, PPT1, LYPLAL1, ABHD4/10/11/12/13 and ABHD17C mRNA expression was significantly upregulated in LUAD, whereas ZDHHC1/8/11/11B/14/15/17/19/22, ABHD6/16A and ABHD17A mRNA expression was significantly downregulated. The functions of the differentially expressed S-palmitoylases and S-depalmitoylases were mainly associated with protein-cysteine S-palmitoyltransferase and protein-cysteine S-acyltransferase activities. Patients with high expression of ZDHHC4/12/18/24, APT2, ABHD4, ABHD11 and ABHD12 had a shorter overall survival. Infiltration of six immune cells (B cells, CD8+ T cells, CD4+ T cells, macrophages, neutrophils, and dendritic cells) was closely associated with the expression of ZDHHC4/12/18/24 and APT2. ZDHHC4/12/18/24 and APT2 positively correlated with the immune checkpoint-related gene CD276. We assessed the mRNA levels of ZDHHC4/12/18/24 and APT2 using qRT-PCR and found increased expression of ZDHHC4/12/18/24 in LUAD compared with healty control lung tissues. ZDHHC4/12/18/24, and APT2 are potential prognostic biomarkers of LUAD. Their expression levels could be related to the tumor microenvironment in LUAD.

Confinement-Modulated Clusterization-Triggered Time-Dependent Phosphorescence Color from Xylan-Carbonized Polymer Dots.

Achieving time-dependent phosphorescence color (TDPC) in organic materials is attractive but extremely challenging due to the nonradiative decay and modulation puzzle of triplet state. Herein, xylan, a hemicellulose waste from the paper mill, was used to construct carbonized polymer dots (CPDs) with clusterization-triggered room-temperature phosphorescence (RTP). CPDs were endowed with tuneable triplet energy levels by through-space conjugation of heteroatom groups, which could be confined in silica to simultaneously activate surface oxide-related low-energy and cross-linked core N-related high-energy emissive centers. Thus, the blue emissive center with a lifetime of 425.6 ms and green emissive center with a longer lifetime of 1506 ms coexisted in the confined CPDs; the former was the dominant contribution to RTP at first, and the latter became dominant over time, leading to a typical TDPC evolution with large color contrast from blue to blue-green and then to green. Meanwhile, the TDPC could remain unobstructed after the confined CPDs were soaked in water for more than a month. The CPDs were successfully applied in location and deformation imaging of hydrogel and advanced dynamic information encryption and anticounterfeiting. The work may shed new light on the design of TDPC materials and broaden the high-value use of paper-mill waste xylan.

What is the impact of ferroptosis on diabetic cardiomyopathy: a systematic review.

Iron overload increases the production of harmful reactive oxygen species in the Fenton reaction, which causes oxidative stress in the body and lipid peroxidation in the cell membrane, and eventually leads to ferroptosis. Diabetes is associated with increased intracellular oxidative stress, inflammation, autophagy, microRNA alterations, and advanced glycation end products (AGEs), which cause cardiac remodeling and cardiac diastolic contractile dysfunction, leading to the development of diabetic cardiomyopathy (DCM). While these factors are also closely associated with ferroptosis, more and more studies have shown that iron-mediated ferroptosis is an important causative factor in DCM. In order to gain fresh insights into the functions of ferroptosis in DCM, this review methodically summarizes the traits and mechanisms connected with ferroptosis and DCM.

A turn-on fluorescent probe for detecting and bioimaging of HOCl in inflammatory and liver disease models.

Hypochlorous acid (HOCl) is a common reactive oxygen species (ROS) associated with the development of liver, tumor, inflammatory, and other diseases. In this work, the turn-on fluorescent probe named (WZ-HOCl) with a naphthalimide structure was designed and synthesized to detect endogenous HOCl in disease models. WZ-HOCl can achieve a fast response to HOCl with good linearity in the range of 0-45 µM (LOD = 147 nM). The application of WZ-HOCl in bioimaging was investigated by constructing a series of cellular disease models, and the results showed that WZ-HOCl could sensitively detect endogenous HOCl in inflammatory and liver disease models. It can also be used to differentiate between hepatocytes and hepatoma cells. WZ-HOCl will provide new methods and ideas for fluorescent probes in detecting drug-induced liver injury, alcoholic and non-alcoholic steatohepatitis, and some inflammation-related diseases.

High precision of sign language recognition based on In2O3transistors gated by AlLiO solid electrolyte.

In recent years, the synaptic properties of transistors have been extensively studied. Compared with liquid or organic material-based transistors, inorganic solid electrolyte-gated transistors have the advantage of better chemical stability. This study uses a simple, low-cost solution technology to prepare In2O3transistors gated by AlLiO solid electrolyte. The electrochemical performance of the device is achieved by forming a double electric layer and electrochemical doping, which can mimic basic functions of biological synapses, such as excitatory postsynaptic current, paired-pulse promotion, and spiking time-dependent plasticity. Furthermore, complex synaptic behaviors such as Pavlovian classical conditioning is successfully emulated. With a 95% identification accuracy, an artificial neural network based on transistors is built to recognize sign language and enable sign language interpretation. Additionally, the handwriting digit's identification accuracy is 94%. Even with various levels of Gaussian noise, the recognition rate is still above 84%. The above findings demonstrate the potential of In2O3/AlLiO TFT in shaping the next generation of artificial intelligence.

Synthesis and biological evaluation of capsaicin analogues as antioxidant and neuroprotective agents.

Capsaicin and its analogues 3a-3q were designed and synthesized as potential new antioxidant and neuroprotective agents. Many analogues exhibited good antioxidant effects, and some showed more potent free radical scavenging activities than the positive drug quercetin (IC50 = 8.70 ± 1.75 µM for DPPH assay and 13.85 ± 2.87 µM for ABTS assay, respectively). The phenolic hydroxyl of capsaicin analogues was critical in determining antioxidant activity. Among these compounds, 3k displayed the most potent antioxidant activity. Cell vitality tests revealed that the representative compound 3k was good at protecting cells from H2O2-induced oxidative damage at low concentrations (cell viability increased to 90.0 ± 5.5% at 10 µM). In addition, the study demonstrated that 3k could reduce intracellular ROS accumulation and increase GSH levels to prevent H2O2-induced oxidative stress in SY5Y cells. In the mitochondrial membrane potential assay, 3k significantly increased the MMP level of SY5Y cells treated with H2O2 and played an anti-neuronal cell death role. These results provide a promising strategy to develop novel capsaicin analogues as potential antioxidant and neuroprotective agents.

Facile Preparation of Full-Color Tunable Room Temperature Phosphorescence Cellulose via Click Chemistry.

Sustainable long-lived room temperature phosphorescence (RTP) materials with color-tunable afterglows are attractive but rarely reported. Here, cellulose is reconstructed by directed redox to afford ample active hydroxyl groups and water-solubility; arylboronic acids with various π conjugations can be facilely anchored to reconstructed cellulose via click chemistry within 1 min in pure water, resulting in full-color tunable RTP cellulose. The rigid environment provided by the B─O covalent bonds and hydrogen bonds can stabilize the triplet excitons, thus the target cellulose displays outstanding RTP performances with the lifetime of 2.67 s, phosphorescence quantum yield of 9.37%, and absolute afterglow luminance of 348 mcd m-2 . Furthermore, due to the formation of various emissive species, the smart RTP cellulose shows excitation- and time-dependent afterglows. Taking advantages of sustainability, ultralong lifetime, and full-color tunable afterglows, et al, the environmentally friendly RTP cellulose is successfully used for nontoxic afterglow inks, delay lighting, and afterglow display.

Single-cell RNA sequencing reveals cancer stem-like cells and dynamics in tumor microenvironment during cholangiocarcinoma progression.

Cholangiocarcinoma is a malignancy of the bile ducts that is driven by activities of cancer stem-like cells and characterized by a heterogeneous tumor microenvironment. To better understand the transcriptional profiles of cancer stem-like cells and dynamics in the tumor microenvironment during the progression of cholangiocarcinoma, we performed single-cell RNA analysis on cells collected from three different timepoints of tumorigenesis in a YAP/AKT mouse model. Bulk RNA sequencing data from TCGA (The Cancer Genome Atlas program) and ICGC cohorts were used to verify and support the finding. In vitro and in vivo experiments were performed to assess the stemness of cancer stem-like cells. We identified Tm4sf1high malignant cells as cancer stem-like cells. Across timepoints of cholangiocarcinoma formation in YAP/AKT mice, we found dynamic change in cancer stem-like cell/stromal/immune cell composition. Nevertheless, the dynamic interaction among cancer stem-like cells, immune cells, and stromal cells at different timepoints was elaborated. Collectively, these data serve as a useful resource for better understanding cancer stem-like cell and malignant cell heterogeneity, stromal cell remodeling, and immune cell reprogramming. It also sheds new light on transcriptomic dynamics during cholangiocarcinoma progression at single-cell resolution.

Laser-driven hierarchical "gas-needles" for programmable and high-precision proximity transfer printing of microchips.

Micro-transfer printing (µTP) techniques are essential for advanced electronics. However, current contact/noncontact µTP techniques fail to simultaneously achieve high selectivity and transfer accuracy. Here, a laser projection proximity transfer (LaserPPT) technique is presented, which assembles the microchips in an approach-and-release manner, combining high-precision parallelism with individual chip control. An embedded carbon layer with a thin gas layer is generated by an ultraviolet laser, followed by absorbing heat from the infrared laser, to enable the sequential expansion of hierarchical "gas-needles." The level 1 large gas-needle with a substantially growing height can reduce the gap between the microchip and the receiver. Then, the level 2 small gas-needles enable the gentle release of a chip. Therefore, the LaserPPT can obtain a strong adhesion modulation (~1000 times), excellent size scalability (<100 micrometers), and high transfer accuracy of ~4 micrometers. Last, the assembly of a micro-light-emitting diode display demonstrates the capabilities for deterministic assembly of microarrays.

The miRNA-mRNA regulatory networks of the response to NaHCO3 stress in industrial hemp (Cannabis sativa L.).

BACKGROUND: Industrial hemp is an important industrial crop and has strong resistance to saline-alkaline stress. However, research on the industrial hemp response to NaHCO3 stress is limited. Therefore, the response mechanisms of industrial hemp under NaHCO3 stress were analysed through miRNA-mRNA regulatory networks. RESULTS: Seedlings of two salt-alkali tolerant and sensitive varieties were cultured in a solution containing 100 mM NaHCO3 and randomly sampled at 0, 6, 12, and 24 h. With prolonged NaHCO3 stress, the seedlings gradually withered, and the contents of jasmonic acid, lignin, trehalose, soluble protein, peroxidase, and superoxide dismutase in the roots increased significantly. The abscisic acid content decreased and then gradually increased. Overall, 18,215 mRNAs and 74 miRNAs were identified as differentially expressed under NaHCO3 stress. The network showed that 230 miRNA-mRNA interactions involved 16 miRNAs and 179 mRNAs, including some key hub novel mRNAs of these crucial pathways. Carbon metabolism, starch, sucrose metabolism, plant hormone signal transduction, and the spliceosome (SPL) were crucial pathways in industrial hemp's response to NaHCO3 stress. CONCLUSIONS: It is speculated that industrial hemp can regulate SPL pathway by upregulating miRNAs such as novel_miR_179 and novel_miR_75, thus affecting starch and sucrose metabolism, plant hormone signal transduction and carbon metabolism and improving key physiological indices such as jasmonic acid content, trehalose content, and peroxidase and superoxide dismutase activities under NaHCO3 stress.

MiR-122 knockdown regulates vascular smooth muscle cells phenotypic switching through enhanced FOXO3 expression.

Vascular smooth muscle cells (VSMCs) phenotypic switching is identified as enhanced dedifferentiation, proliferation, and migration ability of VSMCs, in which microRNAs have been identified as important regulators of the process. The present study is aimed to explore the pathophysiological effect of miR-122 on VSMC phenotypic modulation. Here, the result showed that the decreased miR-122 expression was found in VSMCs subjected to platelet-derived growth factor-BB (PDGF-BB) treatment. Next, we investigated the response of miR-122 knockdown in VSMCs with PDGF-BB stimulation. MiR-122 silencing showed increased proliferation and migration capability, whereas attenuated the differentiation markers expression. The above results were reversed by miR-122 overexpression. Finally, we further demonstrated that FOXO3 was an important target for miR-122. Collectively, we demonstrated that miR-122 silencing promoted VSMC phenotypic modulation partially through upregulated FOXO3 expression that indicated miR-122 may be a novel therapeutic target for neointimal formation.

Large-Scale Preparation for Multicolor Stimulus-Responsive Room-Temperature Phosphorescence Paper via Cellulose Heterogeneous Reaction.

The large-scale preparation of sustainable room-temperature phosphorescence (RTP) materials, particularly those with stimulus-response properties, is attractive but remains challenging. This study develops a facile heterogeneous B─O covalent bonding strategy to anchor arylboronic acid chromophores to cellulose chains using pure water as a solvent, resulting in multicolor RTP cellulose. The rigid environment provided by the B─O covalent bonds and hydrogen bonds promotes the triplet population and suppresses quenching, leading to an excellent lifetime of 1.42 s for the target RTP cellulose. By increasing the degree of chromophore conjugation, the afterglow colors can be tuned from blue to green and then to red. Motivated by this finding, a papermaking production line is built to convert paper pulp reacted with an arylboronic acid additive into multicolor RTP paper on a large scale. Furthermore, the RTP paper is sensitive to water because of the destruction of hydrogen bonds, and the stimuli-response can be repeated in response to water/heat stimuli. The RTP paper can be folded into 3D afterglow origami handicrafts and anti-counterfeiting packing boxes or used for stimulus-responsive information encryption. This success paves the way for the development of large-scale, eco-friendly, and practical stimuli-responsive RTP materials.

Aire drives steroid hormone biosynthesis by medullary thymic epithelial cells.

Thymic epithelial cells (TECs) produce glucocorticoids, which antagonize negative selection of autoreactive thymocytes and promote a competent T cell antigen-specific repertoire. To characterize their source, we generated a knock-in reporter mouse in which endogenous Cyp11b1, the final enzyme in de novo production of active glucocorticoids, was fluorescently tagged with mScarlet. Here, we find that Cyp11b1 is expressed in medullary TECs (mTECs) but not cortical TECs or other cells in the thymus. A distinct characteristic of mTECs is the presence of Aire, a transcription factor that drives expression of tissue-restricted antigens (TRAs) important for establishing immune tolerance. Cyp11b1 expression was highest in Aire+ mTECs, lower in post-Aire mTECs, and absent in mTECs of Aire-deficient mice. Transcriptomic analyses found that multiple enzymatic biosynthetic pathways are expressed specifically in mTECs and are also Aire dependent. In particular, we found that the thymus expresses messenger RNA for enzymes that catalyze production of many bioactive steroids and that glucocorticoids and sex steroids were secreted by cultured thymi. Expression of the transcripts for these genes and production of their final steroid products were markedly reduced in the absence of Aire. Thus, in addition to its well-established role in inducing TRAs that promote negative selection, Aire has an additional and contrary function of inducing glucocorticoids that antagonize negative selection, which together may expand and enhance the TCR repertoire. Furthermore, because Aire drives expression of multiple enzymes responsible for production of other non-gene-encoded bioactive molecules, it might have yet other roles in thymus development and function.